From flagstone patios and walkways to limestone fire pits, seat walls, and full outdoor kitchens, we build Hill Country stonework that looks like it belongs and holds up to the heat.
Hardscape projects we build
- Flagstone or limestone patios and courtyards
- Stone walkways, steps, and garden paths
- Outdoor kitchens, grills, and bar surrounds
- Fire pits and seat walls for outdoor living
- Repairs to heaved, cracked, or settling stonework
- Permeable stone that helps manage runoff
Our hardscape process
We design the space around how you'll use it, then plan grade and drainage first — a patio that traps water against the house creates bigger problems than it solves. Excavation goes deep enough for a proper base; we compact in lifts, add the right setting bed, and pitch the surface to shed water away from structures.
Flagstone is hand-selected and dry-laid or wet-set depending on the design, with joints sanded or mortared to your preference. Limestone features — fire pits, seat walls, kitchen bases — are built on footings that account for soil movement. Every project ends with a clean site and a surface that drains, not one that ponds.
- Use-first design with grade and drainage planned up front
- Engineered, compacted base for expansive clay
- Hand-set Texas flagstone and chopped limestone
- Fire pits, seat walls, and outdoor kitchen masonry
- Proper pitch so water sheds away from the house
- Sealing options for stain and freeze-thaw resistance
Texas stone that fits the Hill Country
We work in cream-toned Texas chopped limestone and rich, variegated flagstone — materials that suit Central Texas architecture and hold up to sun and foot traffic. Stone selection isn't only about looks: thermal behavior, slip resistance around pools, and how a stone weathers all factor into what we recommend for your space.
Because the same clay that moves foundations also moves patios, our base and footing details are what separate a patio that lasts from one that rocks and cracks. That engineering is invisible when it's done right — and impossible to hide when it isn't.
What to expect on patio installation day
A stone patio is a construction project, so the first day usually looks like demolition. We lay out the footprint, protect the areas we're not touching, and excavate to the depth the base requires — often deeper than homeowners expect, because the base is what keeps the surface flat in expansive clay. Excavated spoil is staged for haul-off or reuse in grading.
From there we compact the sub-base in lifts, level the setting bed, and begin hand-setting stone, checking pitch constantly so water runs away from the house. Joints are sanded or mortared last. Depending on square footage and features like seat walls or a fire pit, most residential patios run several days. We keep the site clean at the end of each day and walk you through care and any sealing options once the stone is set.
What Affects the Cost
We don't post fake prices — every job is different. Here's what goes into an honest, written estimate:
- Square footage and layout complexity
- Stone type, thickness, and pattern (dry-laid vs. mortared)
- Base depth and any drainage/grading required
- Added features — fire pit, seat walls, outdoor kitchen
- Site access for materials and excavation
- Sealing and finishing choices
Hardscapes are quoted after a design consultation and site visit so the base, drainage, and stone are all scoped correctly. We don't cut the base to hit a lower number.
Why Round Rock Homeowners Choose Oakwood for Flagstone Patios & Limestone Masonry
Plenty of contractors will quote this work. Here's what you get with a licensed local crew that does it every week across Central Texas:
- We build every patio on a compacted, well-drained base engineered for Blackland clay movement, not set on bare dirt.
- Flagstone and chopped limestone are hand-selected and pitched to shed water away from your foundation.
- Fire pits, seat walls, and outdoor kitchens are built on footings that account for local soil shrink-swell.
- Licensed, insured, BBB Accredited, with honest written estimates that never cut the base to hit a lower number.
Flagstone Patios & Limestone Masonry Across Round Rock & Central Texas
We're based in Round Rock and provide flagstone patios & limestone masonry throughout Williamson and Travis counties and the surrounding region — from Round Rock, Pflugerville, Georgetown, Cedar Park, Hutto, and Brushy Creek. Because we know each area's soil, drainage, and code, the work is engineered for your specific property — not a generic template. See every community we cover on our service areas page, or call (323) 606-0255 for a free on-site estimate.
